stylesheet

Category Archives: Normas API

API EXPLORATION AND PRODUCTION STANDARDS




exploracion y produccion de petroleoAPI MPMS 1
Manual of Petroleum Measurement Standards Chapter 1 – VocabularyAPI MPMS 1 SPANISH
Manual de Estándares de Medición de Petróleo Capítulo 1 Vocabulario-

API MPMS 10.1
Manual of Petroleum Measurement Standards Chapter 10 – Sediment and Water Section 1 – Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

API MPMS 10.2
Manual of Petroleum Measurement Standards Chapter 10 – Sediment and Water Section 2 – Standard Test Method for Water in Crude Oil by Distillation

API MPMS 10.3
Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 3-Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

API MPMS 10.4
Manual of Petroleum Measurement Standards Chapter 10 – Sediment and Water Section 4 – Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure)

API MPMS 10.7
Manual of Petroleum Measurement Standards Chapter 10 – Sediment and Water Section 7 – Standard Test Method for Water in Crude Oils by Karl Fischer Titration

API MPMS 10.8
Manual of Petroleum Measurement Standards Chapter 10 – Sediment and Water Section 8 – Standard Test Method for Sediment in Crude Oil by Membrane Filtration

API MPMS 10.9
Manual of Petroleum Measurement Standards Chapter 10 Sediment and Water Section 9 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

API MPMS 11.1
Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 1-Temperature and Pressure Volume Correction Factors for Generalized Crude Oils Refined Products and Lubricating Oils

API MPMS 11.2
Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M – Compressibility Factors for Hydrocarbons: 0-90 Degrees API Gravity and 638-1074 Kilograms per Cubic Metre Ranges Chapter 11.2.3 and 11.2.3M – Water

API MPMS 11.2.2
Manual of Petroleum Measurement Standards Chapter 11.2.2-Compressibility Factors for Hydrocarbons: 0.350-0.637 Relative Density (60°F/60°F) and -50°F to 140°F Metering Temperature

API MPMS 11.2.2
Manual of Petroleum Measurement Standards Chapter 11 – Physical Properties Data Addendum to Section 2 Part 2 – Compressibility Factors for Hydrocarbons Correlation of Vapor Pressure for Commercial Natural Gas Liquid

API MPMS 11.2.2M
Manual of Petroleum Measurement Standards Chapter 11.2.2M – Compressibility Factors for Hydrocarbons: 350-637 Kilograms per Cubic Metre Density (15 Degrees C) and -46 Degrees C to 60 Degrees C Metering Temperature

API MPMS 11.2.4
Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 2 Part 4-Temperature Correction for the Volume of NGL and LPG Tables 23E 24E 53E 54E 59E and 60E

API MPMS 11.2.5
Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 2 Part 5-A Simplified Vapor Pressure Correlation for Commercial NGLs

API MPMS 11.3.2.1
Manual of Petroleum Measurement Standards Chapter 11.3.2.1-Ethylene Density

API MPMS 11.3.3.2
Manual of Petroleum Measurement Standards Chapter 11.3.3.2 – Propylene Compressibility Tables-Includes Access to Additional Content

API MPMS 11.4.1
Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 4-Properties of Reference Materials Part 1-Density of Water and Water Volumetric Correction Factors for Water Calibration of

API MPMS 11.5
Density/Weight/Volume Intraconversion-First Edition; Includes Access to Additional Content

API MPMS 12.1.1
Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities Section 1-Calculation of Static Petroleum Quantities Part 1-Upright Cylindrical Tanks and Marine Vessels

API MPMS 12.1.1
Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities

API MPMS 12.1.1
Manual de Estándares de Medición de Petróleo Capítulo 12-Cálculo de Cantidades de Petróleo Sección 1-Cálculo de Cantidades de Petróleo Estático Parte 1-Tanques Cilíndricos Verticales y Buques

API MPMS 12.1.1
Manual de Estándares de Medición de Petróleo Capitulo 12-Cálculo de Cantidades de Petróleo

API MPMS 12.1.2
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 1 – Calculation of Static Petroleum Quantities Part 2 – Calculation Procedures for Tank Cars

API MPMS 12.1.2
Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities

API MPMS 12.2.1
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 2 – Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors

API MPMS 12.2.1
Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities

API MPMS 12.2.1
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 2 – Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors

API MPMS 12.2.2
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 2 – Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors

API MPMS 12.2.2
Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities

API MPMS 12.2.3
Calculation of Petroleum Quantities – Section 2 – Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors – Part 3 – Proving Reports

API MPMS 12.2.3
Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities

API MPMS 12.2.4
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 2 – Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors

API MPMS 12.2.4
Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities

API MPMS 12.2.4
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 2 – Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors

API MPMS 12.2.5
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 2 – Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors

API MPMS 12.2.5
Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities

API MPMS 12.2.5
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 2 – Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors

API MPMS 12.3
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 3 – Volumetric Shrinkage Resulting from Blending Light Hydrocarbons with Crude Oils

API MPMS 12.3
Manual of Petroleum Measurement Standards Chapter 12-Calculation of Petroleum Quantities

API MPMS 14.1
Manual of Petroleum Measurement Standards Chapter 14 – Natural Gas Fluids Measurement Section 1 – Collecting and Handling of Natural Gas Samples for Custody Transfer

API MPMS 14.10
Manual of Petroleum Measurement Standards Chapter 14 – Natural Gas Fluids Measurement Section 10-Measurement of Flow to Flares

API MPMS 14.3.1
Manual of Petroleum Measurement Standards Chapter 14 – Natural Gas Fluids Measurement Section 3 – Concentric Square-Edged Orifice Meters Part 1 – General Equations and Uncertainty Guidelines

API MPMS 14.3.2
Manual of Petroleum Measurement Standards Chapter 14Natural Gas Fluids Measurement Section 3 Concentric Square-Edged Orifice Meters Part 2Specification and Installation Requirements

API MPMS 14.3.3
Manual of Petroleum Measurement Standards Chapter 14 – Natural Gas Fluids Measurement Section 3 – Concentric Square-Edged Orifice Meters Part 3 – Natural Gas Applications

API MPMS 14.3.4
Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluids Measurement Sect ion 3-Concent ric Square-Edged Orifice Meters Part 4-Background Development Implementation Procedures and Subroutine Document

API MPMS 14.4
Manual of Petroleum Measurement Standards Chapter 14 – Natural Gas Fluids Measurement Section 4 – Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes

API MPMS 14.5
Calculation of Gross Heating Value Relative Density Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer

API MPMS 14.6
Manual of Petroleum Measurement Standards Chapter 14 – Natural Gas Fluids Measurement Section 6 – Continuous Density Measurement

API MPMS 14.7
Mass Measurement of Natural Gas Liquids

API MPMS 14.8
Manual of Petroleum Measurement Standards Chapter 14 – Natural Gas Fluids Measurement Section 8 – Liquefied Petroleum Gas Measurement

API MPMS 17.1
Manual of Petroleum Measurement Standards Chapter 17-Marine Measurement Section 1-Guidelines for Marine Cargo Inspection

API MPMS 17.1 Manual de Estándares de Medición de Petróleo Capítulo 17 – Mediciones Mar?timas Sección 1 – Guías Para la Inspección de Cargas Maritimas

API MPMS 17.11
Manual of Petroleum Measurement Standards Chapter 17.11 EI Hydrocarbon Management HM 52 Measurement and sampling of cargoes on board tank vessels using closed and restricted equipment

API MPMS 17.12
Procedure for bulk liquid chemical cargo inspection by cargo inspectors

API MPMS 17.2
Manual de Normas de Mediciones Petroleras Capitulo 17 – Mediciones Marinas Seccio`n – Medicio`n de cargas a bordo de buquetanques

API MPMS 17.4
Manual de Estándares de Medición del Petróleo Capítulo 17 Mediciones Marítimas Sección 4 Método para Cuantificación de Volúmenes Pequeños en Buques.

API MPMS 17.6
Manual de Estándares de Medición del Petróleo Capítulo 17Mediciones Marítimas Sección 6 Guías para Determinar el Llenado de Líneas Entre Buques y Tanques en Tierra

API MPMS 17.9
Manual de Estándares de Medición del Petróleo Capitulo 17-Mediciones Marítimas Sección 9-Factor de Experiencia del Buque (VEF) IP Hydrocarbon Management HM 49
API MPMS 18.1
Manual of Petroleum Measurement Standards Chapter 18 – Custody Transfer Section 1 – Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck

API MPMS 19.1
Manual of Petroleum Measurement Standards Chapter 19 – Evaporative Loss Measurement Section 1 – Evaporative Loss from Fixed-Roof Tanks-Third Edition: Incorporates Addendum: 8/2008

API MPMS 19.1A
Evaporation Loss from Low-Pressure Tanks

API MPMS 19.1D
Documentation File for API Manual of Petroleum Measurement Standards Chapter 19.1 – Evaporative Loss from Fixed Roof Tanks

API MPMS 19.2
Manual of Petroleum Measurement Standards Chapter 19 – Evaporative Loss Measurement Section 2 – Evaporative Loss from Floating-Roof Tanks

API MPMS 19.3 PART A
Manual of Petroleum Measurement Standards Chapter 19.3-Evaporative Loss Measurement Part A-Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks

API MPMS 19.3 PART B
Manual of Petroleum Measurement Standards Chapter 19.3 – Evaporative Loss Measurement Part B – Air Concentration Test Method – Rim-Seal Loss Factors for Floating-Roof Tanks
API MPMS 19.3 PART C
Manual of Petroleum Measurement Standards Chapter 19.3 – Evaporative Loss Measurement Part C – Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks
API MPMS 19.3 PART D
Manual of Petroleum Measurement Standards Chapter 19.3 – Evaporative Loss Measurement Part D – Fugitive Emission Test Method for the Measurement of Deck-Seam Loss Factors for Internal Floating-Roof Tanks

API MPMS 19.3 PART E
Manual of Petroleum Measurement Standards Chapter 19.3 – Evaporative Loss Measurement Part E – Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks

API MPMS 19.3 PART H
Manual of Petroleum Measurement Standards Chapter 19.3 – Evaporative Loss Measurement Part H – Tank Seals and Fittings Certification – Administration
API MPMS 19.4
Manual of Petroleum Measurement Standards Chapter 19.4 – Recommended Practice for Speciation of Evaporative Losses

API MPMS 19.4 ERTA
Manual of Petroleum Measurement Standards Chapter 19.4 – Recommended Practice for Speciation of Evaporative Losses

API MPMS 2.2A
Manual of Petroleum Measurement Standard Chapter 2 – Tank Calibration Section 2A – Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method

API MPMS 2.2B
Manual of Petroleum Measurement Standards Chapter 2 – Tank Calibration Section 2B – Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method

API MPMS 2.2C
Manual of Petroleum Measurement Standards Chapter 2 – Tank Calibration Section 2C – Calibration of Upright Cylindrical Tanks Using the Optical-Triangulation Method

API MPMS 2.2D
Manual of Petroleum Measurement Standards Chapter 2 – Tank Calibration Section 2D – Calibration of Upright Cylindrical Tanks Using the Internal Electro-optical Distance-ranging Method

API MPMS 2.2E
Petroleum and Liquid Petroleum Products – Calibration of Horizontal Cylindrical Tanks – Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption

API MPMS 2.2E ERTA
Petroleum and Liquid Petroleum Products – Calibration of Horizontal Cylindrical Tanks – Part 1: Manual Methods-First Edition; ISO 12917-1 Adoption

API MPMS 20.1
Manual of Petroleum Measurement Standards Chapter 20 – Allocation Measurement Section 1 – Allocation Measurement

API MPMS 21.1
Manual of Petroleum Measurement Standards Chapter 21 – Flow Measurement Using Electronic Metering Systems Section 1 – Electronic Gas Measurement

API MPMS 21.2
Manual of Petroleum Measurement Standards Chapter 21 – Flow Measurement Using Electronic Metering Systems Section 2 – Flow Measurement using Electronic Metering Systems Inferred Mass

API MPMS 22.1
General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids

API MPMS 22.2
Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices

API MPMS 3.1A
Manual of Petroleum Measurement Standards Chapter 3 – Tank Gauging Section 1A – Standard Practice for the Manual Gauging of Petroleum and Petroleum Products

API MPMS 3.1A
Manual de Estándares de Medición de Petróleo Capítulo 3 – Medición del Tanque Sección 1A – Procedimiento Estándar para la Medición Manual de Petróleo y Productos del Petróleo

API MPMS 3.1B
Manual of Petroleum Measurement Standards Chapter 3 – Tank Gauging Section 1B – Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging

API MPMS 3.6
Manual of Petroleum Measurement Standards Chapter 3 – Tank Gauging; Section 6 – Meaurement of Liquid Hydrocarbons by Hybrid Tank Measurement Systems

API MPMS 4.1
Manual of Petroleum Measurement Standards Chapter 4 – Proving Systems Section 1 – Introduction

API MPMS 4.2
Manual of Petroleum Measurement Standards Chapter 4 – Proving Systems Section 2 – Displacement Provers

API MPMS 4.4
Manual of Petroleum Measurement Standards Chapter 4 – Proving Systems Section 4 – Tank Provers

API MPMS 4.5
Manual of Petroleum Measurement Standards Chapter 4 – Proving Systems Section 5 – Master-Meter Provers

API MPMS 4.6
Manual of Petroleum Measurement Standards Chapter 4 – Proving Systems Section 6 – Pulse Interpolation

API MPMS 4.7
Manual of Petroleum Measurement Standards Chapter 4 – Proving Systems Section 7 – Field – Standard Test Measures

API MPMS 4.8
Manual of Petroleum Measurement Standards Chapter 4 – Proving Systems Section 8 – Operation of Proving Systems

API MPMS 4.9.1
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers

API MPMS 4.9.2
Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank

API MPMS 4.9.3
Manual of Petroleum Measurement Standards Chapter 4-Proving Systems Section 9-Methods of Calibration for Displacement and Volumetric Tank Provers Part 3-Determination of the Volume of Displacement

API MPMS 5.1
Manual of Petroleum Measurement Standards Chapter 5 – Metering Section 1 – General Considerations for Measurement by Meters

API MPMS 5.2
Manual of Petroleum Measurement Standards Chapter 5 – Metering Section 2 – Measurement of Liquid Hydrocarbons by Displacement Meters

API MPMS 5.3
Manual of Petroleum Measurement Standards Chapter 5 – Metering Section 3 – Measurement of Liquid Hydrocarbons by Turbine Meters

API MPMS 5.4
Manual of Petroleum Measurement Standards Chapter 5 – Metering Section 4 – Accessory Equipment for Liquid Meters

API MPMS 5.5
Manual of Petroleum Measurement Standards Chapter 5 – Metering Section 5 – Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems

API MPMS 5.8
Manual of Petroluem Measurement Standards Chapter 5 – Metering – Section 8 – Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology

API MPMS 6.1
Manual of Petroleum Measurement Standards Chapter 6 – Metering Assemblies Section 1 – Lease Automatic Custody Transfer (LACT) Systems

API MPMS 6.5
Manual of Petroleum Measurement Standards Chapter 6 – Metering Assemblies Section 5 – Metering Systems for Loading and Unloading Marine Bulk Carriers

API MPMS 6.7
Manual of Petroleum Measurement Standards Chapter 6 – Metering Assemblies Section 7 – Metering Viscous Hydrocarbons

API MPMS 8.1
Manual of Petroleum Measurement Standards Chapter 8 – Sampling Section 1 – Standard Practice for Manual Sampling of Petroleum and Petroleum Products

API MPMS 8.1
Manual de Estándares de Medición de Petróleo Capítulo 8-Muestreo Sección 1-Procedimiento Estándar para Muestreo Manual de Petróleo y Productos de Petróleo

API MPMS 8.2
Manual of Petroleum Measurement Standards Chapter 8 – Sampling Section 2 – Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products-Second Edition

API MPMS 8.3
Manual of Petroleum Measurement Standards Chapter 8 – Sampling Section 3 – Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

API MPMS 8.4
Manual of Petroleum Measurement Standards Chapter 8 – Sampling Section 4 – Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

API MPMS 9.1
Manual of Petroleum Measurement Standards Chapter 9 – Density Determination Section 1 – Standard Test Method for Density Relative Density (Specific Gravity) or API Gravity of Crude Petroleum and Liquid Petroleum

API MPMS 9.3
Manual of Petroleum Measurement Standards Chapter 9 – Density Determination Section 3 – Standard Test Method for Density Relative Density and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohy

API PUBL 2558
Wind Tunnel Testing of External Floating-Roof Storage Tanks

API PUBL 4698
Review of Technologies to Measure the Oil and Grease Content of Produced Water from Offshore Oil and Gas Production Operations

API RP 2556
Correction Gauge Tables For Incrustation

API STD 2555
Method for Liquid Calibration of Tanks

API TR 2567
Evaporative Loss from Storage Tank Floating Roof Landings

API MPMS 17.1



API DRILLING STANDARDS




api drilling standardsAPI BULL 5C3
Bulletin on Formulas and Calculations for Casing Tubing Drill Pipe and Line Pipe PropertiesAPI BULL 6J
Bulletin on Testing of Oilfield Elastomers – A Tutorial

API BULL D10
Selecting Rotary Drilling Equipment Procedure for

API PUBL 3802
Control Cuide

API PUBL 3810
Crude Oil Data Exchange Implementation Guidelines

API PUBL 3820
Gas Revenue Accounting Data Exchange; Grade User Manual

API PUBL 3822
Joint Interest Billing Exchange Implementation Guide-Diskette only

API PUBL 3855
Conventions and Implementation Guidelines for EDI Wellsite nformation Transfer Specification (WITS)

API PUBL 3860
Petroleum Industry Data Exchange PIDX Implementation Guideline for EDI Electronic Data Interchange

API RP 13B-1
Recommended Practice for Field Testing Water-based Drilling Fluids

API RP 13B-2
Recommended Practice for Field Testing Oil-Based Drilling Fluids

API RP 13D
Rheology and Hydraulics of Oil-well Drilling Fluids

API RP 13D SPANISH
SP-Practica Recomendada Sobre Reologia E Hidraulica De Los Fluidos De Perforacion Para Pozos De Petroleo

API RP 13E
Recommended Practice for Shale Shaker Screen Cloth Designation

API RP 13K
Recommended Practice for Chemical Analysis of Barite

API RP 16E
Recommended Practice for Design of Control Systems for Drilling Well Control Equipment

API RP 16Q
Recommended Practice for Design Selection Operation and Maintenance of Marine Drilling Riser Systems-First Edition; Formerly RP 2Q and RP 2K

API RP 53
Recommended Practices for Blowout Prevention Equipment Systems for Drilling Wells

API RP 54
Recommended Practice for Occupational Safety for Oil and Gas Well Drilling and Servicing Operations

API RP 5A3
Recommended Practice on Thread Compounds for Casing Tubing and Line Pipe-Third Edition/ISO 13678 Adoption

API RP 5C1
Recommended Practice for Care and Use of Casing and Tubing

API RP 5L1
Recommended Practice for Railroad Transportation of Line Pipe

API RP 5LW
Recommended Practice for Transportation of Line Pipe on Barges and Marine Vessels

API RP 621
Reconditioning of Metallic Gate Globe and Check Valves

API RP 64
Recommended Practices for Diverter Systems Equipment and Operations

API RP 7G
Recommended Practice for Drill Stem Design and Operating Limits

API RP 8B
Recommended Practice for Procedures for Inspections Maintenance Repair and Remanufacture of Hoisting Equipment-Seventh Edition/ ISO 13534

API RP 9B
Recommended Practice on Application Care and Use of Wire Rope for Oil Field Service

API SPEC 13A
Specification for Drilling-Fluid Materials

API SPEC 13A
Specification for Drilling-Fluid Materials-18th Edition; ISO 13500:2009 Adoption

API SPEC 13A
Specification for Drilling-Fluid Materials

API SPEC 13A SPANISH
Especificacion Para Materiales De Los Fluidos De Perforacion

API SPEC 14D
Specification for Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service

API SPEC 16A
Specification for Drill-Through Equipment-Third Edition; ISO 13533:2001/ISO 13533 Adoption

API SPEC 16C
Specification for Choke and Kill Systems

API SPEC 16D
Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment

API SPEC 17D
Specification for Subsea Wellhead and Christmas Tree Equipment

API SPEC 5CT
Specification for Casing and Tubing

API SPEC 5CT ERTA 1
Specification for Casing and Tubing

API SPEC 5CT (METRIC)
Specification for Casing and Tubing (Metric Units)

API SPEC 5CT ERTA 2
Specification for Casing and Tubing

API SPEC 5D
Specification for Drill Pipe

API SPEC 5L
Specification for Line Pipe

API SPEC 6A
Specification for Wellhead and Christmas Tree Equipment

API SPEC 7
Specification for Rotary Drill Stem Elements

API SPEC 7 ADD 1
Specification for Rotary Drill Stem Elements

API SPEC 7 ADD 2
Specification for Rotary Drill Stem Elements

API SPEC 7 ADD 3
Specification for Rotary Drill Stem Elements

API SPEC 7-2
Specification for Threading and Gauging of Rotary Shouldered Thread Connections

API SPEC 7K
Specification for Drilling and Well Servicing Equipment

API SPEC 7K
Drilling and Well Servicing Equipment

API SPEC 8A
Specification for Drilling and Production Hoisting Equipment

API SPEC 8A ADD 1
Specification for Drilling and Production Hoisting Equipment

API SPEC 8C
Specification for Drilling and Production Hoisting Equipment (PSL 1 and PSL 2)-Fourth Edition; ISO 13535:2000/ ISO 13535 Adoption

API SPEC 9A
Specification for Wire Rope-Twenty-fifth Edition; ANSI/API SPEC 9A/ISO 10425:2003/ISO 10425 Adoption

API SPEC 9A RUSSIAN
Specification for Wire Rope

API STD 2220
Contractor Safety Performance Process

API STD 4
SPECIFICATION FOR STANDARD RIGS AND DERRICKS

API TR 5C3
Technical Report on Equations and Calculations for Casing Tubing and Line Pipe Used as Casing or Tubing; and Performance Properties Tables for Casing and Tubing

API TR 6AF
Technical Report on Capabilities of API Flanges Under Combinations of Load

API TR 6AF1
Technical Report on Temperature Derating on API Flanges under Combination of Loading

API TR 6AF2
Technical Report on Capabilities of API Integral Flanges Under Combination of Loading-Phase II

API TR 6F1
Technical Report on Performance of API and ANSI End Connections in a Fire Test According to API Specification 6FA

API WORLDWIDE CEMENTING
Worldwide Cementing Practices-First Edition

br /

API STANDARDS SOBRE REFINACION




planta de refinacionLa sección API de Refinacion (API Refining) incluye manuales, material de entrenamiento, normas, especificaciones, boletines y otras publicaciones relacionados a los equipos, materiales, nomenclatura e inspección de equipamiento, instalaciones y desechos en refinerías.
API API 510
Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration-Eighth Edition; Addendum 1 December 1998; Addendum 2 December 2000; Addendum 3 December 2001; Addendum 4 August 2003API API 570
Piping Inspection Code Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems-Second Edition; Addendum 1 – February 2000; Addendum 2 – December 2001; Addendum 3 – August 2003

API FINAL REPORT 1996
Final Report 1996 American Petroleum Institute/National Petroleum Refiners Association Survey of Refining Operations and Product Quality

API INTERPRETATIONS 1988
1988 Interpretations – Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1989
1989 and 1990 Interpretations – Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1991
1991 Interpretations – Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1992
1992 Interpretations – Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1993
1993 Interpretations – Technical Publications Answers to Technical Inquiries

API INTERPRETATIONS 1995
1994 and 1995 Interpretations – Technical Publications Answers to Technical Inquiries

API MPMS 12.2.5
Manual of Petroleum Measurement Standards Chapter 12 – Calculation of Petroleum Quantities Section 2 – Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5

API PUBL 1210
Trainer Competencies API Central Committee on Training and Development-First Edition

API PUBL 337
Development of Emission Factors for Leaks in Refinery Components in Heavy Liquid Service

API PUBL 3802
Audit Control Cuide

API PUBL 3810
CODE – Crude Oil Data Exchange Implementation Guidelines

API PUBL 3820
Grade; Gas Revenue Accounting Data Exchange; Grade User Manual

API PUBL 3855
Conventions and Implementation Guidelines for EDI Wellsite Information Transfer Specification (WITS)-Version 1.1

API PUBL 3860
Petroleum Industry Data Exchange PIDX Implementation Guideline for EDI Electronic Data Interchange

API PUBL 422
Groundwater Protection Programs for Petroleum Refining and Storage Facilities: A Guidance Document

API PUBL 4261
Alcohols and Ethers a Technical Assessment of Their Application as Fuels and Fuel Components-Third Edition

API PUBL 4262
Methanol Vehicle Emissions

API PUBL 4587
Remote Sensing Feasibility Study of Refinery Fenceline Emissions

API PUBL 4612
Study of Refinery Fugitive Emissions from Equipment Leaks

API PUBL 4613
Study of Refinery Fugitive Emissions from Equipment Leaks Appendices

API PUBL 4639
Estimation of Fugitive Emissions from Petroleum Refinery Process Drains Phase I Report

API PUBL 4700
Primer for Evaluating Ecological Risk at Petroleum Release Sites

API PUBL 534
Heat Recovery Steam Generators First Edition-First Edition

API PUBL 581
Risk-Based Inspection Base Resource Document-First Edition

API PUBL 760
Model Risk Management Plan Guidance for Petroleum Refineries Guidance in Complying with EPA´s RMP Rule (40 Code of Federal Regulations, Part 68)- Third Edition

API PUBL 800
Literature Survey Subsurface and Groundwater Protection Related to Petroleum Refinery Operations

API PUBL 850
API Standards 620, 650, and 653 Interpretations – Tank Construction and In-Service Inspection-Answers to Technical Inquiries; First Edition

API PUBL 932- A
A Study of Corrosion in Hydroprocess Reactor Effluent Air Cooler Systems

API PUBL 937
Evaluation of Design Criteria for Storage Tanks with Frangible Roof Joints

API PUBL 937- A
Study to Establish Relations for the Relative Strength of API 650 Cone Roof Roof-to-Shell and Shell-to-Bottom Joints

API PUBL 938
Experimental Study of Causes and Repair of Cracking of 1 1/4Cr- 1/2Mo Steel Equipment

API PUBL 939- B
Repair and Remediation Strategies for Equipment Operating in Wet H2S Service

API PUBL 959
Characterization Study of Temper Embrittlement of Chromium- Molybdenum Steels

API RP 2021
Management of Atmospheric Storage Tank Fires-Fourth Edition

API RP 2030
Application of Fixed Water Spray Systems for Fire Protection in the Petroleum and Petrochemical Industries

API RP 500
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2-First Edition; Errata 10/17/1998

API RP 505
Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2-First Edition; Errata 8/17/98

API RP 520 PT I
Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries; Part I – Sizing and Selection-Seventh Edition

API RP 520 PT II
Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part II – Installation-Fifth Edition

API RP 521
Guide for Pressure-Relieving and Depressuring Systems-Fourth Edition; Errata February 15, 1999

API RP 531M
Measurement of Noise from Fired Process Heaters

API RP 535
Burners for Fired Heaters in General Refinery Services-Second Edition

API RP 536
Post-Combustion NOx Control for Fired Equipment in General Refinery Services-First Edition

API RP 540
Electrical Installations in Petroleum Processing Plants-Fourth Edition

API RP 551
Process Measurement Instrumentation

API RP 552
Transmission Systems-First Edition

API RP 553
Refinery Control Valves-First Edition

API RP 554
Process Instrumentation and Control-First Edition

API RP 555
Process Analyzers-Second Edition

API RP 556
Instrumentation and Control Systems for Fired Heaters and Steam Generators-First Edition

API RP 557
Guide to Advanced Control Systems-First Edition

API RP 571
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry-First Edition

API RP 572
Inspection of Pressure Vessels (Towers, Drums, Reactors, Heat Exchangers, and Condensers)-Second Edition

API RP 573
Inspection of Fired Boilers and Heaters-Second Edition

API RP 574
Inspection Practices for Piping System Components-Second Edition

API RP 575
Guidelines and Methods for Inspection of Existing Atmospheric and Low-Pressure Storage Tanks-Second Edition

API RP 576
Inspection of Pressure-Relieving Devices-Second Edition

API RP 577
Welding Inspection and Metallurgy-First Edition

API RP 578
Material Verification Program for New and Existing Alloy Piping Systems-First Edition

API RP 579
Fitness-for-Service-First Edition; Errata March 2000

API RP 580
Risk-Based Inspection-First Edition

API RP 582
Welding Guidelines for the Chemical, Oil, and Gas Industries-First Edition

API RP 591
Process Valve Qualification Procedure-Third Edition

API RP 621
Reconditioning of Metallic Gate, Globe, and Check Valves-Second Edition

API RP 651
Cathodic Protection of Aboveground Petroleum Storage Tanks-Second Edition

API RP 652
Linings of Aboveground Petroleum Storage Tank Bottoms-Third Edition

API RP 683
Quality Improvement Manual for Mechanical Equipment in Petroleum, Chemical, and Gas Industries

API RP 684
Paragraphs Rotodynamic Tutorial: Lateral Critical Speeds, Unbalance Response, Stability, Train Torsionals and Rotor Balancing-Second Edition

API RP 686
Recommended Practices for Machinery Installation and Installation Design-First Edition

API RP 687
Rotor Repair-First Edition

API RP 751
Safe Operation of Hydrofluoric Acid Alkylation Units-Second Edition

API RP 752
Management of Hazards Associated with Location of Process Plant Buildings-Second Edition

API RP 932- B
Design, Materials, Fabrication, Operation, and Inspection Guidelines for Corrosion Control in Hydroprocessing Reactor Effluent Air Cooler (REAC) Systems-First Edition

API RP 934
Materials and Fabrication Requirements for 2-1/4Cr-1Mo and 3Cr-1Mo Steel Heavy Wall Pressure Vessels for High Temperature, High Pressure Hyrdogen Service- First Edition

API RP 936
Refractory Installation Quality Control Guidelines-Inspection and Testing Monolithic Refractory Linings and Materials-Second Edition

API RP 941
Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants-Sixth Edition

API RP 945
Avoiding Environmental Cracking in Amine Units-Third Edition

API STD 2000
Venting Atmospheric and Low-Pressure Storage Tanks Nonrefrigerated and Refrigerated-Fifth Edition; Errata 11/15/1999

API STD 2510
Design and Construction of LPG Installations-Eighth Edition

API STD 2610
Design, Construction, Operation, Maintenance, and Inspection of Terminal & Tank Facilities-Second Edition

API STD 526
Flanged Steel Pressure Relief Valves-Fifth Edition

API STD 527
Seat Tightness of Pressure Relief Valves

API STD 530
Calculation of Heater-Tube Thickness in Petroleum Refineries-Fifth Edition; ISO 13704:2001/ISO 13704 Adoption; Errata 1:3/01/04

API STD 537
Flare Details for General Refinery and Petrochemical Service-First Edition

API STD 541
Form-Wound Squirrel-Cage Induction Motors – 500 Horsepower and Larger-Fourth Edition

API STD 546
Brushless Synchronous Machines – 500 kVA and Larger-Second Edition

API STD 547
General-purpose Form-wound Squirrel Cage Induction Motors 250 Horsepower and Larger-First Edition

API STD 560
Fired Heaters for General Refinery Services-Third Edition; Errata: January 2002

API STD 589
Fire Test for Evaluation of Valve Stem Packing-Second Edition

API STD 594
Check Valves: Flanged, Lug, Wafer and Butt-welding-Sixth Edition

API STD 598
Valve Inspection and Testing-Eighth Edition

API STD 599
Metal Plug Valves – Flanged, Threaded and Welding Ends-Fifth Edition

API STD 600
Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries-Eleventh Edition; ISO 10434:1998/ ISO 10434 Adoption

API STD 602
Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries-Eighth Edition; ISO 15761 Adoption

API STD 603
Corrosion-Resistant, Bolted Bonnet Gate Valves – Flanged and Butt- Welding Ends-Sixth Edition

API STD 607
Fire Test for Soft-Seated Quarter-Turn Valves-Fifth Edition; ISO 10497- 5:2004 Adoption

API STD 608
Metal Ball Valves – Flanged, Threaded, and Welding End-Third Edition

API STD 609
Butterfly Valves: Double Flanged, Lug- and Wafer-Type-Sixth Edition

API STD 610
Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries-Tenth Edition; IS 13709 Adoption

API STD 611
General-Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services-Fourth Edition

API STD 612
Petroleum, Petrochemical and Natural Gas Industries – Steam Turbines – Special-Purpose Applications-Sixth Edition

API STD 613
Special Purpose Gear Units for Petroleum, Chemical, and Gas Industry Services-Fifth Edition

API STD 614
Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and Gas Industry Services-Fourth Edition

API STD 616
Gas Turbines for Petroleum, Chemical, and Gas Industry Services- Fourth Edition

API STD 617
Axial and Centrifugal Compressors and Expander-Compressors for Petroleum, Chemical and Gas Industry Services-Seventh Edition; Errata: June 1, 2003

API STD 618
Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services

API STD 619
Rotary-Type Positive-Displacement Compressors for Petroleum, Petrochemical, and Natural Gas Industries-Fourth Edition

API STD 620
Design and Construction of Large, Welded, Low-Pressure Storage Tanks-Tenth Edition; Addendum 1: June 2004

API STD 650
Welded Steel Tanks for Oil Storage-Tenth Edition; Addendum 1, January 2000; Addendum 2, November 2001; Addendum 3, September 2003

API STD 653
Tank Inspection, Repair, Alteration, and Reconstruction-Third Edition; Addendum 1: 9/2003; Addendum 2: 11/2005

API STD 660
Shell-and-Tube Heat Exchangers for General Refinery Services- Seventh Edition/ ISO 16812 Adoption

API STD 661
Air-Cooled Heat Exchangers for General Refinery Service-Fifth Edition; ISO 13706: 2000/ISO 13706 Adoption

API STD 662
Plate Heat Exchangers for General Refinery Services-Second Edition; ISO 15547: 2000/ISO 15547 Adoption

API STD 670
Machinery Protection Systems-Fourth Edition

API STD 671
Special-Purpose Couplings for Petroleum, Chemical, and Gas Industry Services-Third Edition

API STD 672
Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services-Fourth Edition

API STD 673
Centrifugal Fans for Petroleum, Chemical and Gas for Industry Services-Second Edition; Errata: 10/2002

API STD 674
Positive Displacement Pumps – Reciprocating

API STD 675
Positive Displacement Pumps – Controlled Volume

API STD 676
Positive Displacement Pumps – Rotary-Errata; 06/15/1999

API STD 677
General Purpose Gear Units for Petroleum, Chemical, and Gas Industry Services-Second Edition

API STD 681
Liquid Ring Vacuum Pumps and Compressors for Petroleum, Chemical, and Gas Industry Services-First Edition

API STD 682
Pumps Shaft Sealing Systems for Centrifugal and Rotary Pumps-Third Edition; ISO 21049 Adoption

API STD 685
Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry Services Downstream Segment

API TR 938- C
Use of Duplex Stainless Steels in the Oil Refining Industry-First Edition

API TR 939- D
Stress Corrosion Cracking of Carbon Steel in Fuel Grade Ethanol: Review and Survey

API TR 997
Comprehensive Report of API Crude Oil Characterization Measurements-First Edition

NORMAS API – SECCION DE AMBIENTE Y SEGURIDAD

Contaminacion petroleraLa sección API “Environmental and Safety” contiene más de 200 documentos que incluye manuales, material de entrenamiento, normas, especificaciones, prácticas recomendadas, boletines y otras publicaciones que tienen que ver directamente con equipos y materiales, producción offshore, perforación, transporte, nomenclatura, válvulas y su relación con los efectos que producen en el medio ambiente. Son materia de estudio el impacto de la volatilidad de los combustibles, los derrames de petróleo, el smog fotoquímico, el control de las emisiones entre otros.
API CUMULATIVE IMPACT
Cumulative Impact of Environmental Regulations on the U.S. Petroleum Refining, Transportation and Marketing Industries
API DR 145
Identification of Oils that Produce Non-Buoyant in Situ Burning Residues and Methods for Their Recovery
API DR 148
Identification of Organic Toxicants in Treated Refinery Effluents
API DR 225
Remediation of a Fractured Clay Till Using Air Flushing: Field Experiments at Sarnia, Ontario
API DR 342
Toxicity Bioassays on Dispersed Oil in the North Sea: June 1996 Field Trials
API DR 351
Proceedings: Workshop to Identify Promising Technologies for the Treatment of Produced Water Toxicity
API DR 53
Characterization of Exploration and Production Associated Waste
API FORM 5U01
Model Form of Voluntary Unit Agreement-Fourth Edition
API FORM 5U02
Model Form of Voluntary Unit Operating Agreement-Fourth Edition
API FORM 5U04
Model Form of Statutory Unit Operating Agreement-Second Edition
API INTERPRETATIONS 1988
1988 Interpretations – Technical Publications Answers to Technical Inquiries
API INTERPRETATIONS 1989
1989 and 1990 Interpretations – Technical Publications Answers to Technical Inquiries
API INTERPRETATIONS 1991
1991 Interpretations – Technical Publications Answers to Technical InquiriesAPI INTERPRETATIONS 1992
1992 Interpretations – Technical Publications Answers to Technical Inquiries
API INTERPRETATIONS 1993
1993 Interpretations – Technical Publications Answers to Technical Inquiries
API INTERPRETATIONS 1995
1994 and 1995 Interpretations – Technical Publications Answers to Technical Inquiries
API MF 5U03
Model Form of Statutory Unit Agreement-Second Edition
API PUB 352
Management of Residual Materials: 1997 Petroleum Refining Performance
API PUBL 2021A
Interim Study – Prevention and Suppression of Fires in Large Aboveground Atmospheric Storage Tanks-First Edition
API PUBL 2207
Preparing Tank Bottoms for Hot Work-Fifth Edition; Errata June 1999
API PUBL 2218
Fireproofing Practices in Petroleum and Petrochemical Processing Plants-Second Edition
API PUBL 2230
Static Electricity Research Project
API PUBL 2351
Inproving Human Performance Systems in the Petroleum Industry; Phase I Report: Data Collection and Feasibility Assessment
API PUBL 2524
Impact Assessment of New Data on the Validity of American Petroleum Institute Marine Transfer Operation Emission Factors
API PUBL 300
Generation and Management of Wastes and Secondary Materials in the Petroleum Refining Industry: 1987-1988
API PUBL 301
Aboveground Storage Tank Survey

API PUBL 302
Waste Minimization in the Petroleum Industry Source Reduction Recycle Treatment Disposal a Compendium of Practices
API PUBL 303
Generation and Management of Wastes and Secondary Materials
API PUBL 304
Evaluation of Restoration Alternatives for Natural Resources Injured by Oil Spills
API PUBL 305
Protecting Agricultural Crops from Ozone Exposures Key Issues and Future Research Directions
API PUBL 306
An Engineering Assessment of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 307
Engineering Assessment of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 309
Current Status and Research Needs Related to Biogenic Hydrocarbons
API PUBL 310
Analysis of Refinery Screening Data
API PUBL 311
Environmental Design Considerations for Petroleum Refining Crude Processing Units
API PUBL 31101
Environmental Design Considerations for Petroleum Refining Crude Processing Units
API PUBL 312
Responding to Environmental Challenge A Discussion Among People from Industry, Government and Environmental Groups
API PUBL 315
Assessment of Tankfield Dike Lining Materials and Methods
API PUBL 316
Identifying and Measuring Nonuse Values for Natural and Environmental Resources a Critical Review of the State of the Art
API PUBL 317
Industry Experience with Pollution Prevention Programs
API PUBL 322
Engineering Evaluation of Acoustic Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 323
Engineering Evaluation of Volumetric Methods of Leak Detection in Aboveground Storage Tanks
API PUBL 324
Generation and Management of Residual Materials Petroleum Refining Performance 1990 Survey
API PUBL 325
Evaluation of a Methodology for the Detection of Leaks in Aboveground Storage Tanks
API PUBL 326
Cost Effectiveness of VOC and NOx Emission Control Measures
API PUBL 327
Aboveground Storage Tank Standards: A Tutorial
API PUBL 328
Laboratory Evaluation of Candidate Liners for Secondary Containment of Petroleum Products
API PUBL 329
Generation and Management of Residual Materials Petroleum Refining Performance 1991 Survey
API PUBL 330
Survey of API Members Aboveground Storage Tank Facilities; Health and Environmental Affairs
API PUBL 331
Environmental Performance Indicators: Methods for Measuring Pollution Prevention
API PUBL 332
Comparison of Screening Values from Selected Hydrocarbon Screening Instruments
API PUBL 333
Generation and Management of Residual Materials
API PUBL 334
Guide to Leak Detection for Aboveground Storage Tanks
API PUBL 336

Management of Residual Materials: 1994 Petroleum Refining Performance
API PUBL 337
Development of Emission Factors for Leaks in Refinery Components in Heavy Liquid Service
API PUBL 339
Management of Residual Materials: 1995 Petroleum Refining Performance
API PUBL 340
Liquid Release Prevention and Detection Measures for Aboveground Storage Facilities
API PUBL 341
Survey of Diked-Area Liner Use at Aboveground Storage Tank Facilities
API PUBL 342
Fugitive Emissions from Equipment Leaks 1: Monitoring Manual
API PUBL 343
Fugitive Emissions from Equipment Leaks II: Calculation Procedures for Petroleum Industry Facilities
API PUBL 345
Management of Residual Materials: 1996 – Petroleum Refining Performance
API PUBL 346
Results of Range-Finding Testing of Leak Detection and Leak Location Technologies for Underground Pipelines
API PUBL 347
Hazardous Air Pollutant Emissions from Gasoline Loading Operations at Bulk Gasoline Terminals
API PUBL 348
Air Toxics Emission Factors for Combustion Sources Using Petroleum- Based Fuels – Volume 1 Development of Emission Factors Using API/WSPA Approach
API PUBL 349
Air Toxics Emission Factors for Combustion Sources Using Petroleum- Based Fuels – Graphical-User-Interface Database and User´s Manual Version 2.0.1
API PUBL 351
Overview of Soil Permeability Test Methods
API PUBL 4452

1987 Oil Spill Conference
API PUBL 4465
Evaluation of Treatment Technologies for Listed Petroleum Refinery Wastes
API PUBL 4479
Proceedings 1989 Oil Spill Conference Prevention, Behavior, Control, Cleanup
API PUBL 4525
Compilation of Field- Collected Cost and Treatment Effectiveness Data for the Removal of Dissolved Gasoline Components from Groundwater
API PUBL 4527
Evaluation of Limiting Constituents Suggested for Land Disposal of Exploration and Production Wastes
API PUBL 4529
Oil Spill Conference Prevention, Behavior, Control, Cleanup
API PUBL 4531
Chemical Fate and Impact of Oxygenates in Groundwater: Solubility of BTEX from Gasoline-Oxygenate Mixtures
API PUBL 4546
Hazard Response Modeling Uncertainty (A Quantitative Method) Volume II Evaluation of Commonly Used Hazardous Gas Dispersion Models
API PUBL 4558
Options for Minimizing Environmental Impacts of Freshwater Spill Response
API PUBL 45592
Results of Toxicological Studies
API PUBL 4580
1993 Oil Spill Conference
API PUBL 4587
Remote Sensing Feasibility Study of Refinery Fenceline Emissions
API PUBL 4588
Development of Fugitive Emission Factors and Emission Profiles for Petroleum Marketing Terminals Volume I: Text
API PUBL 4589

Fugitive Hydrocarbon Emissions from Oil and Gas Production Operations
API PUBL 4592
Odor Threshold Studies Performed with Gasoline and Gasoline Combined with MTBE, ETBE and TAME
API PUBL 4593
Transport and Fate of Non-BTEX Petroleum Chemicals in Soils and Groundwater
API PUBL 4594
Critical Review of Toxicity Values and an Evaluation of the Persistence of Petroleum Products for Use in Natural Resource Damage Assessments
API PUBL 4599
Interlaboratory Study of Three Methods for Analyzing Petroleum Hydrocarbons in Soils
API PUBL 4600
Metals Criteria for Land Management of Exploration and Production Wastes: Technical Support Document for API Recommended Guidance Values
API PUBL 4601
Transport and Fate of Dissolved Methanol, Methyl-Tertiary-Butyl- Ether, and Monoaromatic Hydrocarbons in a Shallow Sand Aquifer Appendix H: Laboratory Biotransformation Studies
API PUBL 4602
Minimization, Handling, Treatment, and Disposal of Petroleum Products Terminal Wastewaters; Errata – 1994
API PUBL 4603
Investigation of MOBILE5a Emission Factors: Assessment of Exhaust and Nonexhaust Emission Factor Methodologies and Oxygenate Effects
API PUBL 4604
Investigation of MOBILE5a Emission Factors: Evaluation of I/M and LEV Program Benefits
API PUBL 4605
Investigation of MOBILE5a Emission Factors: Evaluation of IM240-to- FTP Correlation and Base Emission Rate Equations
API PUBL 4606
Source Control and Treatment of Contaminants Found in Petroleum Product Terminal Tank Bottoms
API PUBL 4607
User´s Guide and Technical Resource Document: Evaluation of Sediment Toxicity Tests for Biomonitoring Programs

API PUBL 4608
Evaluation of Sediment Toxicity Tests for Biomonitoring Programs
API PUBL 4609
In Situ Air Sparging: Evaluation of Petroleum Industry Sites and Considerations for Applicability, Design and Operation
API PUBL 4610
Critical Review of Draft EPA Guidance on Assessment and Control of Bioconcentratable Contaminants in Surface Waters
API PUBL 4611
Interlaboratory Study of EPA Methods 1662, 1654A, and 1663 for the Determination of Diesel, Mineral and Crude Oils in Drilling Muds from Offshore Oil and Gas Industry Discharges
API PUBL 4612
Study of Refinery Fugitive Emissions from Equipment Leaks
API PUBL 4613
Study of Refinery Fugitive Emissions from Equipment Leaks Appendices
API PUBL 4615
Emission Factors for Oil and Gas Production Operations
API PUBL 4616
Importance of Using Alternative Base Cases in Photochemical Modeling
API PUBL 4617
Monte Carlo Approach to Generating Equivalent Ventilation Rates in Population Exposure Assessments
API PUBL 4618
Characteristics and Performance of Supercritical Fluid Extraction (SFE) in the Analysis of Petroleum Hydrocarbons in Soils and Sludges
API PUBL 4619
Study to Characterize Air Concentrations of Methyl Tertiary Butyl Ether (MTBE) at Service Stations in the Northeast
API PUBL 4620
International Oil Spill Conference Proceedings Achieving and Maintaining Preparedness
API PUBL 4621

A: IMPLEMENTING AN EFFECTIVE RESPONSE MANAGEMENT SYSTEM – B: THE USE AND MISUSE OF SCIENCE IN NATURAL RESOURCE DAMAGE ASSESSMENT – C: PERSPECTIVES ON ESTABLISHING AND MAINTAINING OIL POLLUTION RESPONSE CAPABILITIES-INCLUDES API 4621A, B & C
API PUBL 4622
Petroleum Industry Data Characterizing Occupational Exposures to Methyl Tertiary Butyl Ether (MTBE) 1983-1993
API PUBL 4623
Anecdotal Health-Related Complaint Data Pertaining to Possible Exposures to Methyl Tertiary Butyl Ether (MTBE): 1993 and 1994 Follow-Up Surveys (1984- 1994)
API PUBL 4625
Service Station Personnel Exposures to Oxygenated Fuel Components – 1994
API PUBL 4627
In Situ and On-Site Biodegradation of Refined and Fuel Oils: A Review of Technical Literature 1988 – 1991
API PUBL 4628
Guidance Manual for Modeling Hypothetical Accidental Releases to the Atmosphere
API PUBL 4631
Petroleum Contaminated Low Permeability Soil: Hydrocarbon Distribution Processes, Exposure Pathways and In Situ Remediation Technologies
API PUBL 4632
Reducing Uncertainty in Laboratory Sediment Toxicity Tests
API PUBL 4633
Barium in Produced Water: Fate and Effects in the Marine Environment
API PUBL 4634
Index and Abstracts of API Health-Related Research 13th Edition 1959-1994
API PUBL 4635
Compilation of Field Analytical Methods for Assessing Petroleum Product Releases
API PUBL 4636
HGSYSTEM 3.0: Technical Reference Manual and User´s Guide
API PUBL 4637
Analysis of Causes of Failure in High Emitting Cars

API PUBL 4638
Calculation Workbook for Oil and Gas Production Equipment Fugitive Emissions
API PUBL 4639
Estimation of Fugitive Emissions from Petroleum Refinery Process Drains Phase I Report
API PUBL 4640
Petroleum in the Freshwater Environment an Annotated Bibliography 1946 – 1993
API PUBL 4641
Summary of Produced Water Toxicity Identification Evaluation Research
API PUBL 4642
A Study to Quantify On-Road Emissions of Dioxins and Furans from Mobile Sources: Phase 2
API PUBL 4643
Estimation of Infiltration and Recharge for Environmental Site Assessment
API PUBL 4644
Methodology for Estimating Incremental Benzene Exposures and Risks Associated with Glycol Dehydrators
API PUBL 4645
Methane and Carbon Dioxide Emission Estimates from U.S. Petroleum Sources
API PUBL 4646
Evaluation of Fuel Tank Flammability of Low RVP Gasolines
API PUBL 4647
Brain Glial Fibrillary Acidic Protein (GFAP) as a Marker of Neurotoxicity During Inhalation Exposure to Toluene
API PUBL 4648
Human Neurobehavioral Study Methods: Effects of Subject Variables on Research Results
API PUBL 4650
Analysis of High-Mileage-Vehicle Emissions Data from Late-Model, Fuel-Injected Vehicles
API PUBL 4651
International Oil Spill Conference Improving Environmental Protection – Progress, Challenges, Responsibilities-Proceedings
API PUBL 4653
Fugitive Emission Factors for Crude Oil and Product Pipeline Facilities

API PUBL 4654
Field Studies of BTEX and MTBE Intrinsic Bioremediation
API PUBL 4655
Field Evaluation of Biological and Non-Biological Treatment Technologies to Remove MTBE/Oxygenates from Petroleum Product Terminal Wastewaters
API PUBL 4656
Bioaccumulation: How Chemicals Move from the Water into Fish and Other Aquatic Organisms
API PUBL 4657
Effects of Sampling and Analytical Procedures on the Measurement of Geochemical Indicators of Intrinsic Bioremediation: Laboratory and Field Studies
API PUBL 4658
Methods for Measuring Indicators of Intrinsic Bioremediation: Guidance Manual
API PUBL 4659
Graphical Approach for Determining Site-Specific Dilution-Attenuation Factors (DAFs)-Technical Background Document and User´s Guide; Cover Page and A-20 – 1998
API PUBL 4661
Exploration and Production Emission Calculator (EPEC)-Disk Available
API PUBL 4662
Evaluation of a Petroleum Production Tank Emissions Model- Appendices A, B, C, & D- October 1997
API PUBL 4663
Remediation of Salt-Affected Soils at Oil and Gas Production Facilities-Errata 10/15/98
API PUBL 4664
Mixing Zone Modeling and Dilution Analysis for Water-Quality-Based NPDES Permit Limits
API PUBL 4665
Analysis and Reduction of Toxicity in Biologically Treated Petroleum Product Terminal Tank Bottoms Water
API PUBL 4666
Toxicity of Common Ions to Freshwater and Marine Organisms
API PUBL 4667
Vehicle Emissions Testing of Rapidly Aged Catalysts

API PUBL 4668
Delineation and Characterization of the Borden MTBE Plume: An Evaluation of Eight Years of Natural Attenuation Processes
API PUBL 4670
Selecting Field Analytical Methods a Decision-Tree Approach
API PUBL 4671
Technical Bulletin on Oxygen Releasing Materials for In Situ Groundwater Remediation
API PUBL 4672
The Use of Treatment Wetlands for Petroleum Industry Effluents
API PUBL 4673
Impacts of Petroleum Product Marketing Terminals on the Aquatic Environment
API PUBL 4674
Assessing the Significance of Subsurface Contaminant Vapor Migration to Enclosed Spaces Site-Specific Alternatives to Generic Estimates
API PUBL 4675
Fate and Environmental Effects of Oil Spills in Freshwater Environments
API PUBL 4676
Arsenic: Chemistry, Fate, Toxicity, and Wastewater Treatment Options
API PUBL 4677
Fugitive Emissions from Refinery Process Drains Volume I; Fugitive Emission Factors for Refinery Process Drains
API PUBL 4678
Fugitive Emissions from Refinery Process Drains Volume II; Fundamentals of Fugitive Emissions from Refinery Process Drains
API PUBL 4679
Amine Unit Emissions Model AMINECalc Version 1.0-Errata June 16, 1999; Disk Available
API PUBL 4680
Amine Unit Air Emissions Model Evaluation
API PUBL 4681
Fugitive Emissions from Refinery Process Drains Volume III, Process Drain Emission Calculator: APIDRAIN Version 1.0-Disk Available
API PUBL 4682
Free-Product Recovery of Petrolem Hydrocarbon Liquids
API PUBL 4683
Correlation Equations to Predict Reid Vapor Pressure and Properties of Gaseous Emissions for Exploration and Production Facilities
API PUBL 4684
Compilation and Review of Data on the Environmental Effects of In Situ Burning of Inland and Upland Oil Spills
API PUBL 4686
1999 Oil Spill Conference Proceedings
API PUBL 4687
1999 Internatiional Oil Spill Conference Issue Papers: Myths and Realities of Oil Spill Planning and Response: The Challenges of a Large Spill; Judgeing Oil Spill Response Performance: The Challenge of Competing Perspectives-TR IOSC-007 and TR IOSC-008
API PUBL 4688
Temporary Treatment Options for Petroleum Distribution Terminal Wastewaters
API PUBL 4690
Guide for the Use of Semipermeable Membrane Devices (SPMDs) as Samplers of Waterborne Hyhrophobic Organic Contaminats
API PUBL 4691
Fate of Spilled Oil in Marine Waters: Where Does It Go? What Does It Do? How Do Dispersants Affect It?
API PUBL 4692
A Decision-Maker´s Guide to Dispersants: A Review of the Theory and Operational Requirements
API PUBL 4693
Effects of Oil and Chemically Dispersed Oil in the Environment
API PUBL 4694
Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports
API PUBL 4695
Understanding and Preparing Applications for Petroleum Facility NPDES Discharge Permits
API PUBL 4700
Primer for Evaluating Ecological Risk at Petroleum Release Sites
API PUBL 4701
Bioaccumulation: An Evaluation of Federal and State Regulatory Initiatives
API PUBL 4702
Technologies to Reduce Oil and Grease Content of Well Treatment, Well Completion, and Workover Fluids for Overboard Disposal
API PUBL 4703
Gas Fired Boiler – Test Report Refinery Site A Characterization of Fine Particulate Emission Factor and Specification Profiles from Stationary Petroleum Industry Combustion Sources
API PUBL 4704
Gas Fired Heater – Test Report Site B Characterization of Fine Particulate Emission Factors and Specification Profiles from Stationary Petroleum Industry Combustion Sources
API PUBL 4706
Environmental Considerations for Marine Oil Spill Response
API PUBL 4709
Risk-Based Methodologies for Evaluating Petroleum Hydrocarbon Impacts at Oil and Natural Gas E&P Sites
API PUBL 4711
Methods for Determining Inputs to Environmental Petroleum Hydrocarbon Mobility and Recovery Models
API PUBL 4712
Gas-Fired Steam Generator – Test Reprot Site C: Characterization of Fine Particulate Emission Factors and Speciation Profiles from Stationary Petroleum Industry Combustion Sources
API PUBL 4713
Test Report: Fluidized Catalytic Cracking Unit at a Refinery (Site A); Characterization of Fine Particulate Emission Factors and Specification Profiles from Stationary Petroleum Industry Combustion Sources
API PUBL 4714
A Guide to Polycyclic Aromatic Hydrocarbons for the Non- Specialists
API PUBL 4720
Comparison of API and EPA Toxic Air Pollutant Emission Factors for Combustion Sources-First Edition
API PUBL 4721
Analytical Detection and Qualification Limits: Survey of State and Federal Approaches
API PUBL 4730
Groundwater Remediation Strategies Tool
API PUBL 4733
Risk-Based Screening Levels for the Protection of Livestock Exposed to Petroleum Hydrocarbons
API PUBL 4734
Modeling Study of Produced Water Release Scenarios
API PUBL 4741
Collecting and Interpreting Soil Gas Samples from the Vadose Zone A Practical Strategy for Assessing the Subsurface Vapor-to-Indoor Air Migration Pathway at Petroleum Hydrocarbon Sites
API PUBL 4743
Hazard Narrative for Tertiary-Butyl Alcohol (TBA) CAS Number 75 65 0
API PUBL 760
Model Risk Management Plan Guidance for Petroleum Refineries Guidance in Complying with EPA´s RMP Rule (40 Code of Federal Regulations, Part 68)- Third Edition
API PUBL 761
Model Risk Management Plan Guidance for Exploration and Production (E&P) Facilities-Third Edition
API PUBL 9100A
Model Environment, Health & Saftey (EHS) Management System A Voluntary Tool for Companies Interested in Developing an EHS Management System or Enhancing an Existing System
API PUBL 9100B
Guidance Document for Model EHS Management System A Manual to Assist Companies Interested in Developing an EHS Management System or Enhancing an Existing System
API REPORT PUBL 344
Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles
API RP 2003
Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents-Sixth Edition
API RP 2005
Service Station Safety-Sixth Edition; Supplement – 1996
API RP 2016
Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks-First Edition
API RP 9000
Management Practices, Self-Assessment Process, and Resource Materials-Second Edition
API SECURITY
Security Vulnerability Assessment Methodology for the Petroleum and Petrochemical Industries-Second Edition
API SECURITY GUIDELINES
Security Guidelines for the Petroleum Industry-Third Edition
API SMART LEAK
Smart Leak Detection and Repair (LDAR) for Control of Fugitive Emissions
API STD 1512
Petroleum Test Laboratory Accreditation Program-First Edition
API TR 400
Preliminary Study of the Effect of Toluene on Pregnancy of the Rat (Inhalation Exposure)
API TR 401
Toluene the Effect on Pregnancy of the Rat (Inhalation Exposure)
API TR 402
Tertiary-Amyl Methyl Ether (TAME) Toxicity to the Freshwater Alga Selenastrum Capricornutum
API TR 403
Closed-Patch Repeated Insult Dermal Sensitization Study of Tertiary Amyl Methyl Ether (TAME) in Guinea Pigs (Buehler Method)
API TR 404
Inhalation Oncogenicity Study of Commercial Hexane in Rats and Mice Part I – Rats Final Abridged Report
API TR 405
Inhalation Oncogenicity Study of Commercial Hexane in Rats and Mice Part II – Mice Final Abridged Report
API TR 406
Tert-Amyl Methyl Ether (TAME) – Acute Toxicity to Daphnids (Daphnia Magna) Under Flow- Through Conditions TSCA Guideline Section Mark 797.1300
API TR 407
Tert-Amyl Methyl Ether (TAME) – Acute Toxicity to Mysid Shrimp (Mysidopsis Bahia) Under Static Renewal Conditions TSCA Guideline Section Mark 797.1930
API TR 408
Tert-Amyl Methyl Ether (TAME) – Acute Toxicity to Rainbow Trout (Oncorhynchus Mykiss) Under Flow-Through Conditions TSCA Guideline Section Mark 797.1400
API TR 409
Primary Skin Irritation Study In Rabbits of: API 91-01 and PS-6 Unleaded Test Gasolines (CAIS Abstract No. 42-2014)
API TR 410
Chromosome Aberrations in Chinese Hamster Ovary (CHO) Cells Exposed to Tertiary Amyl Methyl Ether (TAME)
API TR 411
Chinese Hamster Ovary (CHO)/HGPRT Mutation Assay of Tertiary Amyl Methyl Ether (TAME)
API TR 412
A Range-Finding Developmental Inhalation Toxicity Study of Unleaded Gasoline Vapor Condensate in Rats and Mice Via Whole-Body Exposers
API TR 414
An Inhalation Developmental Toxicity Study of Unleaded Gasoline Vapor Condensate in the Rat Via Whole-Body Exposure

br /

NORMA API 653 EN ESPAÑOL

  • Alcance de la norma API 653
  • Referencias de la norma API 653
  • Norma API 653 - Inspección, reparación, modificación y reconstrucción de estanques
  • Evaluación del techo, manto, fondo y fundación del estanque – Norma API 653
  • Consideraciones de fractura frágil – Estándar API 653
  • Inspecciones externas, internas, espesor de fondo del tanque – Standard API 653
  • Trabajo preparativo para la inspección interna de tanques – API 653
  • Listas de revisión de inspección para tanques – Norma API 653
  • Registros e informes de inspección de tanques – Estándar API 653
  • Materiales para distintos tipos de tanques de almacenamiento basados en el API 653: Materiales nuevos, materiales originales para estanques reconstruidos, accesorios para soldadura
  • Consideraciones de diseño para estanques reconstruidos mediante el estándar API 653: uniones soldadas nuevas, uniones soldadas existentes, diseño del manto, anclajes del manto, contravientos y estabilidad del manto, techos, diseño antisísmico
  • Reparación y modificación de estanque basado en la norma estándar API 653: Retiro y reemplazo del material de la placa de manto, reparación del manto usando placas de parche soldadas traslapadas, reparación y defectos del material de placa de manto, modificación de mantos de estanque para cambiar la altura del manto del estanque, reparación de soldaduras defectuosas, reparación de anclajes del manto, reparación de fondos de estanque, reparación de techos fijos, techos flotantes, soldadura en alma viva (hot tap)
  • Desmantelamiento y reconstrucción – Norma API 653: Limpieza y liberación de gas del tanque de almacenamiento, métodos de desmantelamiento, reconstrucción y tolerancias dimensionales
  • Soldadura – Standard API 653: Calificación de soldadura, identifiación y registro
  • Exámenes y pruebas en tanques – Estándar API 653: Exámenes no destructivos, radiografías, pruebas hidrostáticas, pruebas de fiiltración
  • Marcado y Registro de Datos mediante API 653: Placa registro, registro de datos, certificación