ASME B16.5 ESPAÑOL


ASME B16.5: Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/ Inch Standard

  • Method of Designating Location of Auxiliary Connections When Specified
  • Method of Designating Outlets of Reducing Fittings in Specifications
  • Thread Length for Connection Tapping
  • Socket Welding for Connections
  • Butt Welding for Connections
  • Bosses for Connections
  • End Flange Facings and Their Relationship to Flange Thickness and Center-to-End and End-to-End Dimensions
  • Bevel for Wall Thicknesses t From 5 mm to 22 mm Inclusive
  • Bevel for Wall Thicknesses t Greater Than 22 mm
  • Inside Contour for Use With Rectangular Backing Ring
  • Inside Contour for Use With Taper Backing Ring
  • Bevel for Outside Thickness
  • Bevel for Inside Thickness
  • Bevel for Combined Thickness
  • Straight Hub Welding Flanges
Sobre Rafael Osorio 1134 Artículos
Ingeniero de Petróleo y Gas Natural egresado de la Universidad Nacional de Ingenieria, Perú. Rafael Osorio

Dejar una contestacion

Tu dirección de correo electrónico no será publicada.


*